These Search Coils consist of 5000 turns of very fine copper wire on a bobbin fixed at one end of fibreglass board (electrically insulated and non magnetic) and on the other end two 4 mm socket terminals are fitted
They can be used to determine field strengths or flux density inside the air gap of magnets or solenoids
An a
c
or d
signal can be applied to the search coils to study the effect of interacting magnetic fields
The Axial Coil has the coil mounted with its axis parallel to the axis of the PCB board
The Lateral Coil has the coil mounted with its axis at 90 degrees to the axis of the PCB board
The coils are available to order separately: Lateral Search Coil ‐ B8R07038Axial Search Coil ‐ B8R07037
